Turn Off Power to submersible pump (located in fuse panel)
Bypass water softener
Remove bolts from well cap
Pour in 2 gallons of liquid bleach
Pour in 5 gallons of clean water
Re-install bolts on well cap make sure not to pinch wires
Turn on power to submersible pump
Starting at the lowest level run the
water (ie laundry tub/bathroom) until you smell the presence of chlorine.
Shutoff faucet and work your way through the house running one faucet at a
time until your satisfied you have the presence of chlorine at every water
outlet.
Let chlorinated water sit in plumbing system for a minimum of 24 hours
The following day run a
outside garden hose in the yard for a period of 4 to 6 hours (sometimes it
may take even longer) this will pump the excess chlorine from the well.
Once your satisfied there is no chlorine present shut-off garden hose.
Beginning at the lower level remove the aerator from the faucet head and
flush the faucet until no chlorine is present, work your way through out
the rest of the house running one faucet (remember to remove aerator ) at
a time until all chlorine is flushed from the plumbing system.
